Mosquitoes breed in still water, so the main fix is to keep water moving and to remove the still spots. Change still water weekly, run pumps through mosquito season, and skim debris that shelters larvae. Fish and natural predators help. Bti, a biological larvicide, is an option if these steps are not enough. It is a bacterial product rather than a synthetic chemical, but it is still a pesticide, so use it only as the label directs.
Why water features breed mosquitoes
A mosquito goes from egg to adult in about 7 to 10 days in warm weather, and takes longer when it is cool. Two common types breed around features:
- Culex lays rafts of eggs on still water.
- Aedes lays eggs just above the water line in containers. The eggs hatch when water rises over them.
The larvae, called wigglers, hang at the surface and breathe through a siphon. Anything that disturbs the surface disrupts them.
Keep the water moving
Moving water is the most effective barrier. Run pumps continuously during mosquito season. Long periods with the pump switched off give the larvae time to develop.
Aim the spray or the outflow so the surface across the feature stays disturbed. A fountain with a gentle spray over the whole basin works better than a single still corner.
Find and remove still spots
Even near moving water, mosquitoes can breed in stagnant pockets. Check these:
- Pump vaults and saucers under plant pots
- Clogged gutters that drain near the feature
- Folds in tarps or covers where water pools
- Plant pots and containers sitting in the feature area
- Corners the spray never reaches
Drain or fill the still spots, or move the pump outflow so it reaches them.
Change or top up still water
Change the water in a birdbath or any still bowl at least once a week. In hot weather, change it twice a week. Drain and refill rather than just topping up, because topping up does not remove eggs or larvae.
For pondless features, keep the reservoir clean and check the vault for standing water.
Fish and natural predators
Fish eat mosquito larvae. Goldfish, koi, fathead minnows and native minnows are common choices where they suit the water and the climate.
Mosquitofish (Gambusia) are often sold for mosquito control, but they are invasive in many regions. Release is restricted or illegal in some areas. Do not release them into local waters, and check local rules before you buy any.
Dragonfly nymphs, backswimmers, diving beetles and frogs also eat larvae. A pond with a healthy mix of these tends to have fewer mosquitoes.
Bti: a targeted biological option
Bti, short for Bacillus thuringiensis israelensis, is a naturally occurring bacterium. It is toxic to the larvae of mosquitoes, black flies and fungus gnats, and is registered as a pesticide. It is widely considered low-risk for fish, birds, pets and plants when used as the label directs.
Mosquito dunks are a common Bti product. Labels state the area each one covers and how long it lasts. A common label covers about 100 square feet for about 30 days. Follow the label on your product, because coverage and timing differ.
If you want zero pesticides, skip Bti and rely on moving water, clean water and fish.
What does not work
- A film of vegetable oil. It harms birds, fish and other insects. Do not use it.
- Citronella plants or candles. They do not stop breeding.
- Copper pennies. They add too little copper to matter, and copper is toxic to fish and snails.
- Any non-labeled insecticide where birds or pets drink.
- Assuming any moving water means zero mosquitoes. Still corners still breed them.
Pondless features: seal and screen
Pondless features have a buried reservoir, which can hold standing water. Cover the vault lid and any gaps with fine mesh. Check the reservoir for standing water after rain, and keep the spillway clear so water does not pool in the rock.
A quick checklist
- Keep the pump running through mosquito season.
- Change still water every week, or twice a week in heat.
- Remove still spots: saucers, gutters, tarp folds and pots.
- Skim leaves and debris that shelter larvae.
- Use fish that suit your water, and check local rules first.
- Use Bti only as the label directs, if other steps are not enough.
For a birdbath, see turning a bird bath into a water feature. For cleaning the pump and basin, see fountain maintenance. If the pump has stopped and the water is standing, see how to unclog a water fountain.