Water Features

Fountain Maintenance: Cleaning and Keeping Algae Out

Keep a pond or garden fountain clear with a simple schedule for topping up, cleaning the pump and controlling algae without harsh chemicals or dish soap.

On this page
  1. How often to clean a fountain
  2. Check the water level first
  3. Deep clean in five steps
  4. Why fountains turn green
  5. How to stop algae in a water fountain
  6. Does Dawn dish soap kill algae?
  7. What kills algae fastest?
  8. How to maintain a concrete fountain
  9. Winter care
  10. Common mistakes

A fountain stays clean mostly because it is cleaned on a schedule. Algae grows where sunlight meets nutrients from leaves, bird droppings and dust. The most effective steps are shade, debris removal and regular cleaning.

How often to clean a fountain

  • Every few days to weekly: Check the water level, wipe the basin and skim out leaves.
  • Every 2 to 4 weeks: Do a deep clean. Unplug the pump, drain the basin, scrub it and clean the pump intake.
  • Every 1 to 3 months: Drain fully and clear out mineral scale.
  • Seasonally: Spring clean, watch for algae in summer, remove leaves in fall, and store the pump for winter in cold climates.

These intervals vary with sun and debris. A fountain in full sun under a tree needs more attention than one in shade with no nearby trees.

Check the water level first

A pump that runs dry can burn out within hours, so check the level daily during hot weather. Top up with distilled or rainwater where tap water is hard. Hard water leaves white scale that clogs the pump and marks the basin.

Deep clean in five steps

  1. Unplug the pump. Then remove any decorative rocks or items from the basin and set them aside.
  2. Drain the basin. Scrub it with a soft brush. A soft cloth is enough for light buildup.
  3. Remove scale. For white mineral scale, use white vinegar, either 50/50 with water or at full strength for heavy buildup. Let it sit, then rinse well.
  4. Clean the pump. Take the intake cover or screen off and rinse out debris, algae and hair. Pull out the impeller, brush it and the housing, and soak the parts in vinegar for up to 12 hours if they are scaled. See how to unclog a water fountain if the pump is blocked.
  5. Refill and restart. Reassemble the pump, submerge it fully, tilt it to purge air, refill the basin and plug the pump back in on a GFCI outlet.

Why fountains turn green

Green water is usually suspended algae, which floats in the water and colors it. String algae forms threads on surfaces. Both need sunlight, warmth and nutrients, and still water makes them worse. A green fountain is not necessarily dirty. Often it just gets too much sun.

For green water in a larger pond, a UV clarifier helps. String algae does not respond to UV, so it has to be removed by hand.

How to stop algae in a water fountain

  • Move it out of direct sun. Shade for much of the day slows growth. Placement is the cheapest fix.
  • Keep the pump running. Circulation and surface movement make it harder for algae to settle. The pump must stay submerged to work.
  • Remove debris early. Leaves, grass clippings, bird droppings and fertilizer feed algae. Skim them out, and place the fountain away from overhanging trees where you can.
  • Change the water. Drain and refill on schedule so nutrients do not build up.
  • Add aeration. Fountains with a frothy or tiered spray add oxygen, which helps.
  • Consider a UV clarifier for green water in a larger pond.
  • Use an algaecide with care. Read the label. Many are not safe for birds, pets, fish or plants. Barley straw works in ponds but does little in a small, often-drained fountain.

Does Dawn dish soap kill algae?

No. Dish soap is not a safe fix. Its residue foams and can harm birds and fish. A scrub and a full drain-and-refill will do more for your fountain than soap will.

What kills algae fastest?

There is no instant fix that is also safe for birds and fish. The quickest result comes from physical removal: drain the basin, scrub it and rinse well. Vinegar and water works on surfaces and scale. A product labeled for fountain algae works over several days and needs a check of the label for wildlife and fish safety.

Avoid these common shortcuts:

  • Bleach damages finishes and seals and harms wildlife. If it is ever used, rinse very thoroughly.
  • Copper pennies add too little copper to matter, and copper is toxic to fish and snails.
  • Dish soap foams and harms birds and fish, as above.

How to maintain a concrete fountain

Clean a concrete or cast stone basin with a soft brush and mild cleaner, and rinse it well. Avoid bleach and harsh chemicals, which can damage the surface. Check for cracks and flaking each fall, and drain the basin before a hard freeze so water does not expand inside the material.

Winter care

In freezing climates, drain the fountain completely and let it dry. Store the pump indoors, or in a bucket of water if the manufacturer allows it. Water that freezes inside ceramic or concrete can flake the surface or crack it.

Common mistakes

  • Assuming moving water stops algae by itself. Sunlight and nutrients still feed algae, so moving water helps but does not do the job alone.
  • Believing algae means dirty water. It often means too much sun.
  • Running the pump dry. Brief dry running can overheat it and crack seals or shafts.
  • Skipping the schedule. A fountain left without upkeep tends to clog and grow algae.

For the full picture of costs and upkeep, see how expensive water features are. If you are working on a pond fountain, the small pond fountains guide covers pump sizing and intake care. Standing water can also breed mosquitoes, which is covered in mosquitoes in water features.

The complete guide to water features

Simple Backyard Water Features: Types and Ideas
Read the guide

Keep exploring

Guides from other topics

All topics →