Algae and Water Quality

How to Get Rid of Pond Algae and Keep It Away

Practical, fish-safe steps to get rid of pond algae: identify the type, remove it in sections, then cut the sunlight and nutrients that feed it.

On this page
  1. Identify the type of algae first
  2. Why it grows
  3. Step 1: Remove what you can by hand
  4. Step 2: Treat in sections, with aeration running
  5. Option: chemical algaecides
  6. Option: UV clarifiers for green water
  7. Long-term: natural controls that take time
  8. Keep it from coming back
  9. Safety
  10. Common questions

Pond algae is a normal part of most backyard ponds. The goal is not a sterile pond but one where algae stays at a level that doesn’t cloud the water, clog the pump, or stress the fish. Lasting control usually combines three things: remove what you can by hand, treat small sections when you need to, and cut the sunlight and nutrients that feed the growth.

Identify the type of algae first

Different algae respond to different fixes, so start by looking closely.

  • Green water (free-floating single cells): The water turns pea-soup green, and your hand may disappear when you put it in. This type responds well to a UV clarifier. See UV clarifiers for pond water for how they work.
  • String algae (blanketweed): Bright green, slimy, hair-like strands that cling to rocks, liners and waterfalls, or float as mats. Manual removal is the main tool. A UV clarifier does not touch it. The string algae guide covers it in detail.
  • Surface scum or blue-green films: Thick, paint-like or scummy films, sometimes blue-green. These are usually cyanobacteria, which are bacteria rather than true algae, and some produce toxins. Handle them with extra care (see the safety section below).
  • Chara (muskgrass): A bottom-growing, crusty, branched growth that feels gritty and has a musky, garlic-like smell. It is a green alga that looks like a plant.
  • Brown film: Usually diatoms. They are common in new ponds and in shaded water, and often fade as the pond matures.

A thin green or brown film on the liner and rocks is normal. The concern starts when growth covers the water, blocks the pump, or comes with changes in fish behavior. For a broader look at the groups involved, see the 7 major types of algae.

Why it grows

Algae need three things: sunlight, dissolved nutrients (mainly phosphate and nitrate), and warm water. Remove any one of them and growth slows.

  • Nutrients come from fish waste, uneaten food, decaying leaves and plants, lawn fertilizer and runoff. Tap water can add phosphate too. A commonly cited target is to keep phosphate below about 0.05 mg/L, since nuisance blooms are common above that level, though the exact threshold varies.
  • Light comes straight from the sky. Shallow, open, sunny ponds are the most prone.
  • Still water lets algae settle into mats and lets warm surface layers stay separate from the rest of the pond.

New ponds often go green for the first six to eight weeks while the filter matures and plants fill in. That is a common pattern, not a sign that something has gone wrong.

Step 1: Remove what you can by hand

Manual removal takes nutrients out of the pond along with the algae, so do it before any treatment.

  • Twist string algae around a stick or stiff brush, or lift it with a pond rake or net.
  • Leave pulled algae on the pond edge for a few hours so insects, snails and tadpoles can crawl back into the water. Then compost it, or move it well away from the edge so it can’t wash back in.
  • Skim surface mats regularly. Thick mats block gas exchange at the surface, so add aeration if coverage is heavy.

Step 2: Treat in sections, with aeration running

Dying algae decays and uses up oxygen. The most common fish killer during algae control is that oxygen drop, more than the product itself.

  • Treat no more than about a third to half of the pond at a time, and wait before doing the next section.
  • Treat in the morning, because oxygen is lowest around dawn.
  • Avoid treating during hot spells, when warm water holds less oxygen.
  • Keep an air pump, air stone, fountain or waterfall running during and after treatment.
  • Measure the pond’s volume before you dose anything. For a rectangular pond measured in feet, length × width × average depth × 7.48 gives US gallons.

Option: chemical algaecides

Algaecides can knock algae back quickly, but they don’t remove the nutrients that feed it. If the source stays, the algae often returns.

  • Copper-based algaecides can kill fish, snails and shrimp, especially when alkalinity (KH) is low. Avoid them when KH is below about 50 ppm, and never use them around snails, shrimp, or sensitive fish such as orfe or sturgeon. Copper sulfate is a poor choice for most ponds because it is toxic in soft, low-KH water. See pond pH and KH for how to test.
  • Granular peroxide-based products (such as sodium percarbonate) are sold for ponds and are generally used at the label rate. Spread them on the algae, not on the fish.
  • Liquid algaecides can use up oxygen fast in a pond with fish. Use them only as directed, with heavy aeration, and avoid hot days.

“Fish-safe” does not mean risk-free. Doubling the dose will not work faster and can cause a fish kill. Follow the label. If a product is not labeled for fish ponds, move the fish to a holding tank first.

Option: UV clarifiers for green water

A UV clarifier suits free-floating green water. The UV light damages algae cells as the water passes through the unit, and the filter then catches the clumps. Green water usually clears within about three to seven days, sometimes up to two weeks. UV does nothing to string algae or to algae growing on rocks and liners. It also doesn’t remove nutrients, so clearer water can sometimes shift growth to string algae. Keep the sleeve clean and replace the bulb on schedule.

Long-term: natural controls that take time

Natural methods usually work over weeks to a full season. Expect steady progress rather than an instant fix.

  • Beneficial bacteria break down the organic material that feeds algae and help process fish waste. Results usually take a few weeks. See beneficial pond bacteria for the types and what to look for.
  • Plants compete for nutrients and shade the water. Aim to cover roughly 50 to 70 percent of the surface with a mix of water lilies, floating plants and submerged oxygenators such as hornwort or anacharis. A common rule of thumb is about one bunch of submerged plants per one to two square feet of surface, adjusted for how fast your plants grow. Avoid invasive floating plants such as water hyacinth and water lettuce, which are banned or restricted in many places.
  • Barley straw may slow algae growth. It is slow, taking roughly four to eight weeks to start working in water above about 50°F (10°C), and the evidence for it is mixed. Don’t expect it to clear a bloom.
  • Grazers such as ramshorn snails and tadpoles eat algae films. They won’t clear thick mats.
  • Shade structures and pond edges that keep lawn runoff out also help.

Keep it from coming back

Most long-term control comes from habits:

  • Feed fish only what they eat in about five minutes, and feed less when the water is cold.
  • Net fallen leaves in autumn, and remove dead leaves and plants promptly.
  • Keep fertilized lawn runoff out by raising the pond edges or adding a gravel border.
  • Keep fish numbers within what the filter can handle. Overcrowding adds nutrients quickly.
  • Quarantine new plants in a bucket for one to two weeks before they go in the pond.
  • Clean the filter, but rinse media in pond water rather than tap water. Chlorine in tap water kills the bacteria that do the filtering.

Safety

  • Keep dogs and children out of scummy, blue-green or paint-like water. Some cyanobacteria produce toxins that can be deadly to dogs, sometimes within hours.
  • Wear gloves when handling sludge or algae mats, and cover any cuts. Pond water can carry bacteria.
  • Read and follow every product label. Don’t mix products, and don’t use household products such as bleach, vinegar or dish soap as a shortcut. Dish soap is harmful to fish, for example.

Common questions

Will pond algae go away on its own? Sometimes. In an established pond with healthy plants and balanced fish numbers, growth often levels off as the system matures. A pond with high nutrients usually keeps producing algae until the causes are reduced.

Is algae in a pond toxic? Most common pond algae are not toxic to fish or people. Cyanobacteria scums are the exception, and they can be dangerous, so treat them as a safety issue.

Why does my pond have algae? Usually because it has sunlight, nutrients and warm, still water at the same time. Reducing any one of these slows growth.

Start with the type of algae, then remove what you can, treat in sections with aeration running, and work on the light and nutrients over the season. For the specifics, the step-by-step guide to removing algae without killing fish is a good next read.

Keep exploring

Guides from other topics

All topics →