Water Features

How expensive are water features?

Water feature costs run from about $15 for a solar bird bath fountain to $25,000 or more for a custom pond. See typical ranges, hidden costs and running costs.

On this page
  1. Typical cost ranges
  2. What drives the price up
  3. Hidden costs
  4. Running costs
  5. Replacement and upkeep costs
  6. Ways to save money without cutting corners
  7. How to compare quotes
  8. Budget planning

Water features cost anywhere from about $15 for a solar bird bath fountain to $25,000 or more for a professionally built pond with a waterfall. A plug-in resin or fiberglass fountain typically costs $100 to $800. A pondless waterfall DIY kit runs about $1,000 to $3,000 before installation. Prices vary by region, materials and installer, so treat these as rough guides.

Typical cost ranges

Type Typical cost Notes
Solar bird bath fountain About $15 to $50 Runs only in direct sun unless it has a battery
DIY container or pot fountain About $50 to $200 Needs a sealed, watertight container
Self-contained resin or fiberglass fountain About $100 to $800 Plug in and go
Cast stone or concrete tiered fountain About $300 to $2,000 or more Premium stone costs much more
Wall fountain About $200 to $3,000 or more Depends on material and size
Pondless waterfall DIY kit About $1,000 to $3,000 Professional installs often run $3,000 to $15,000 or more
Garden pond with waterfall, professionally built Often $5,000 to $25,000 or more Koi ponds with full filtration cost more
Professional pond cleanout Often $300 to $1,000 or more per visit Depends on pond size and condition

What drives the price up

  • Basin size. A larger basin holds more water, catches more splash and needs a bigger pump.
  • The fountain piece. A resin unit costs far less than a custom stone column or a metal sculpture.
  • Installation complexity. Stacked boulders, polished pebbles, driftwood, lighting and planting can double the cost of the same fountain.
  • Add-ons. Lighting, auto-fill valves, auto-dosers, jets and fire features each add cost.
  • Access and location. Tight access may mean hand-carrying materials. A remote site adds travel and crew costs.
  • Materials. Natural rock, heavy granite and custom bronze cost more than fiberglass or polyresin.

Hidden costs

Many budgets miss these.

  • Electrical work. A new outdoor GFCI outlet from an electrician often costs a few hundred dollars. The price depends on how far the outlet is from the panel.
  • Utilities and digging. Call 811 in the US, or your local locate service, before you dig. Irrigation lines are often in the way.
  • Lawn, fence and driveway damage. Heavy equipment can crack concrete or churn up turf.
  • Gas lines. A fire feature needs a gas line, which is a separate job.
  • Drainage. Building in a low spot can create water problems, so plan an overflow.
  • Underground surprises. Tree stumps, old concrete and shallow bedrock add time and cost.

Running costs

Running costs are easy to forget because they are spread over the year.

Use this formula: watts × 24 × 365 ÷ 1,000 = kilowatt-hours (kWh) per year. Multiply by your electricity rate.

  • A 10-watt pump running all year uses about 88 kWh, roughly $15 at 17 cents per kWh.
  • A 50-watt pump running all year uses about 438 kWh, roughly $75.
  • A 250-watt waterfall pump running all year uses about 2,190 kWh, roughly $370.

Pump efficiency matters more than size. A well-matched small pump can cost less to run than an oversized one. Check your local rate, because it changes the totals.

Replacement and upkeep costs

  • Pumps typically last about 2 to 5 years, depending on brand and care.
  • Liners matter too. A 45-mil EPDM liner often lasts 20 years or more. Cheaper PVC liners wear out sooner.
  • Professional cleanouts can cost $300 to $1,000 or more per visit for a pond.

Plan a yearly reserve for pump replacement and cleaning.

Ways to save money without cutting corners

  • Start with a pre-fabricated basin for a small project. It is faster and usually cheaper than a custom basin.
  • Keep the fountain piece simple. A resin replica or a single stone column costs far less than a trio of stones.
  • Use basic gravel instead of imported pebbles.
  • Skip extra automation at first. Run conduit now so you can add lights later without digging again.
  • Stage the project. Finish the infrastructure first, then add the decorative parts over time.
  • Hire a local, qualified installer. Local installers often have lower travel costs.

How to compare quotes

A low quote is not always a good deal. Ask each installer to list:

  • The basin type, liner and underlayment
  • The pump model, its rating and the head it is sized for
  • Who handles electrical work, and whether conduit is included
  • Cleanup, permits and locate calls
  • Warranty terms on the pump and liner

Ask for references and, if possible, a visit to a finished project. Check that the installer is licensed and insured.

Budget planning

Set two budgets. The first is the build cost. The second is the yearly cost, covering electricity, water top-ups, cleaning and a reserve for a new pump every few years.

For a feature you can build with a container, see how to make a homemade fountain. For a pond fountain, see fountains for small ponds. For a waterfall or pondless build, see pond waterfalls and pondless water features and building a garden stream.

The complete guide to water features

Simple Backyard Water Features: Types and Ideas
Read the guide

Keep exploring

Guides from other topics

All topics →