String algae, also called blanketweed, is a filamentous green alga. It forms slimy strands on rocks, liners and waterfall lips, and it can break loose into mats on the surface. For most ponds, removing it by hand is the most reliable first step. Chemical treatments can help in the short term. Long-term control comes from cutting the nutrients and light that feed it.
What string algae is
String algae is a group of filamentous green algae. Common pond genera include Spirogyra (slimy and bright green, with a silky feel), Cladophora (coarser and more matted) and Oedogonium. In the UK it is often called blanketweed. The strands start on the bottom or on hard surfaces. As they mature, oxygen bubbles trapped in the strands lift them to the surface, where they form floating mats.
Why it appears in your pond
String algae grows best in clear, sunny water with plenty of nutrients, especially phosphate and nitrate. Waterfalls, streams and shallow shelves are hotspots because they get light and oxygen-rich flow.
It often takes over after a UV clarifier has cleared green water. The clarifier removes the free-floating cells but not the nutrients, so growth can shift to string algae on surfaces. The UV clarifier guide explains what the unit does and doesn’t do.
Remove it by hand
Hand removal takes out nutrients along with the algae, so it does more than a chemical that only kills it in place.
- Twist it out. Wind strands around a rough stick, a stiff brush or a toilet brush and lift them out. This works well on rocks and in small patches.
- Rake or net it. An algae rake usually has a head of about 12 to 24 inches on a long, extendable handle. Floating rakes catch surface mats, and a fine pond net handles loose strands. Choose a rake long enough to reach the area you need to clear, and a head width that suits the pond’s edge.
- Let the critters crawl out. Leave pulled algae on the pond edge for a few hours so insects, snails and tadpoles can crawl back into the water. Then compost it or move it well away from the edge.
- Clean up after. Dead mats rot and use oxygen. Remove what you can, and keep the aerator or waterfall running.
Work in small sections rather than clearing the whole pond at once. For how to size a treatment safely, see how to get rid of pond algae without killing fish.
Do you need a chemical treatment?
Sometimes. Products for string algae come in a few types:
- Granular sodium percarbonate products are spread onto the algae and act within hours to days. Dose by the label.
- Liquid blanketweed treatments and enzyme products vary by brand. Results usually take one to three weeks.
- Copper-based products carry more risk. They can harm fish, snails and shrimp, especially with low KH. Check alkalinity and the label first. Pond pH and KH explains how to test both.
Whatever you use, treat only part of the pond at a time. A large die-off can use up enough oxygen to kill fish. Remove the dead algae afterward and keep aeration running.
Stop it from coming back
Chemicals clear the mat, but nutrients and light bring it back. The long-term work is what keeps it down.
- Shade the water. Aim for roughly 50 to 70 percent surface cover from plants or shade structures. Water lilies, floating plants and taller marginal plants all help.
- Add competing plants. Submerged oxygenators such as hornwort, anacharis (elodea) and eelgrass (Vallisneria) use nutrients the algae would otherwise take. A rule of thumb is about one bunch per one to two square feet of surface.
- Cut back on fish food. Feed only what the fish eat in about five minutes. Uneaten food is a major nutrient source.
- Control phosphate. Keep phosphate below about 0.05 mg/L where you can. Phosphate-removing media in the filter can help, but they need checking and replacing.
- Consider barley straw, with realistic expectations. It may slow regrowth, but the evidence is mixed and it works slowly. See the natural pond cleaning guide for more on how the natural options compare.
Magnetic and electronic “algae control” devices are also marketed for this. There is little independent evidence that they work, so don’t rely on them.
Myths to drop
- UV clarifiers kill string algae. They only affect free-floating cells that pass through the unit.
- A bigger pump fixes it. More flow can help string algae on waterfalls, because it brings nutrients and oxygen to the growth.
- Any string algae is a problem. A few strands are normal. Remove them when they start to spread.
- One treatment is permanent. It will regrow if nutrients and light stay high.
Safety
- Treat heavy growth in sections so the decay doesn’t drop oxygen across the whole pond.
- Follow copper-product labels exactly, and keep copper away from snails and shrimp.
- Wear gloves when pulling out wet mats, and wash up afterward. Pond water can carry bacteria.
Common questions
What eats string algae? Snails, tadpoles and some insects graze soft growth, and some fish nibble at it. None of them clears a heavy mat quickly, so manual removal is still needed for thick growth.
What naturally kills algae? Nothing natural works quickly on string algae. Plants, shade, beneficial bacteria and grazers reduce the supply of nutrients and light over time. Barley straw may help, but the evidence is mixed.
Will pond algae go away on its own? A balanced pond can settle down as plants fill in. A pond with high nutrients usually keeps producing mats until the causes are reduced.
What kills pond algae but not fish? No algaecide is completely risk-free for fish. The safer options are manual removal, shade, plants, and pond-labeled treatments used at label rates with aeration running. The guide to removing algae without killing fish goes through the steps.
For green water as well as string algae, the complete pond algae guide covers the full plan.