Pond Building

Raised and Above-Ground Ponds: Block-Built Ponds for Fish and Koi

Build a raised pond from block, timber or stock tank for fish or koi, with insulation, a level base, proper wall support and an optional pond window.

On this page
  1. Is a raised pond the right choice?
  2. Depth and size for a raised koi pond
  3. Choose the wall material
  4. Footings and the base
  5. Insulate the walls
  6. Line the pond
  7. Add a bottom drain and skimmer, if you plan them
  8. Fit a pond window
  9. Common questions
  10. Common mistakes
  11. Safety

Is a raised pond the right choice?

A raised pond sits partly or wholly above ground, inside walls of block, timber or another frame. It suits sites where digging is difficult, and it puts the water at a comfortable height for viewing fish. Many people also find it easier to clean and to see into.

There are trade-offs. Raised walls lose heat, and the water in them can freeze and overheat faster than water in a dug pond, because the surrounding soil no longer insulates it. A raised pond also needs walls that can hold back the water’s weight, which makes the structure more involved. Being out of the soil does not make a pond freeze-proof.

If you are not sure whether to build up or dig down, the in-ground pond guide covers the dug option in full.

Depth and size for a raised koi pond

Raised or semi-raised koi ponds still need at least 3 ft (90 cm) of water depth. A common way to manage this is to dig the pond partly into the ground, which lowers the height of the walls you need to build. The two-foot depth question explains why koi need this much depth.

Keep the walls at a height you can work with. Around 18 to 20 inches (45 to 50 cm) is comfortable, and a wall at that height can double as seating.

Choose the wall material

Concrete block is the most common choice for a fish or koi pond. Standard concrete block is nominally 8 × 8 × 16 in, but the actual size is about 7⅝ × 7⅝ × 15⅝ in, so plan your course heights from the real dimensions. For a wall that holds water, block should be reinforced with vertical rebar, and the hollow cores should be filled with concrete.

Timber frames, such as sleepers or landscape timbers, can suit shallow ponds. Deep ponds need structural support, and timber must be rated for ground contact. Freestanding wall designs have limits, so tall water-retaining walls may need an engineer’s check.

Block and timber both need a waterproof lining. Dry-stacked block cannot hold back water pressure on its own, and mortar or render alone does not make block waterproof. Water pressure builds with depth, roughly 0.433 psi for each foot, so walls that look solid can still fail under a full pond. If you are unsure about the design, get it checked before you fill.

Footings and the base

Lay a poured concrete footing under the walls. As a general guide, the footing is about twice the width of the wall. In cold climates, the footing needs to sit below the frost line so the walls do not heave.

Level the base carefully before you lay the first course. Check each course as you build upward. An out-of-level wall makes the rim uneven, and an uneven rim exposes the liner on the high side.

Insulate the walls

Fix insulation board, such as extruded polystyrene (XPS) foam, to the inside of the walls. It protects the liner from the block and helps reduce temperature swings, which are a real stress on fish in a raised pond. Insulation is most useful where winters are cold or summers are hot.

Line the pond

Block walls can be lined in two main ways:

  • Flexible liner. A 45 mil EPDM or butyl liner laid over underlay is the usual choice. Underlay protects the liner from the block edges and from the ground below, and a thick geotextile or old carpet pad can help. The liners and sealants guide explains the choices and the fish-safe checks.
  • Render and coat. The walls are rendered and then coated with fibreglass (GRP), epoxy or another fish-safe coating. Coatings need the full cure time before you fill, so plan the schedule.

Cap the walls with coping stones that overhang the inside edge. The coping hides and shades the liner edge, and it keeps the liner from being exposed to UV light.

Add a bottom drain and skimmer, if you plan them

Koi ponds often have a bottom drain and a surface skimmer. A bottom drain has to be built in before the liner goes down, and it is hard to add later. Plan the pipework before the walls are finished. The liners and sealants guide explains the flange and gasket details, and the pool drain article covers why pond drains are not the same as pool drains.

Fit a pond window

A pond window is a panel built into the side wall of a raised pond, so you can see the fish at eye level. It can also help you spot early signs of illness or injury, because you can see the fish’s sides and underside.

Windows are usually made from acrylic or toughened glass. Acrylic is lighter and common in kits, and it is often the choice for DIY builds. Glass resists scratching better over the long term but is heavier. Whichever you pick, the thickness depends on the size of the window and the depth of water behind it, so use the supplier’s thickness chart rather than a rule of thumb.

Some points to plan for:

  • Rebate. The window sits in a recess built into the blocks, sleepers or frame. It is not glued flat against the outside of the wall.
  • Fixing. Some kits clamp the liner with a frame. Others bond acrylic with aquarium-grade silicone. Bathroom silicone is not suitable for a pond.
  • Sealing. Use a sealant rated for pond or aquarium use, and keep the window sealed with the liner or membrane around it.

Common questions

Are raised ponds any good?

They can be a good choice for fish and koi, particularly where digging is hard or where you want the water at eye level. They do need more care in winter and summer, because the walls do not insulate the water the way soil does. Build the walls properly, insulate them and plan the depth, and a raised pond can work well.

How deep does a raised pond need to be?

For koi, at least 3 ft (90 cm) of water depth. Goldfish and plants need less, but the depth guidance in the garden pond guide applies to both.

Is a concrete pond safe for fish?

New concrete leaches lime and can raise the water’s pH. Let it cure for about 28 days, then seal or neutralise it before fish go in. A coated concrete pond can be safe, but only once the coating has cured fully and been rinsed.

Common mistakes

  • Dry-stacking block to hold back water.
  • Skipping the footing or the rebar in the block cores.
  • Using timber that is not rated for ground contact.
  • Leaving out insulation in climates with hard winters or hot summers.
  • Using bathroom silicone around a window.
  • Siting a raised pond against a house wall without drainage.

Safety

Lifting block and coping stone is heavy, so get help or use proper lifting technique. Failed walls release water suddenly, which is why the wall design and the footing matter. Do not site a raised pond against a house wall unless the drainage is properly planned. Water in a raised pond is still a drowning risk for small children, so check local fencing rules and cover or fence the pond where children visit.

The complete guide to pond building

How to Build a Garden Pond: Planning, Digging and Design
Read the guide

Keep exploring

Guides from other topics

All topics →