Does clay hold water on its own?
Clay can hold water, but it is not automatically watertight. A garden-scale pond on clay usually still needs a liner. Large earth ponds, which are built to a different standard, are a separate case and can rely on a well-compacted clay basin. For a garden pond, plan on a liner unless testing shows otherwise.
Test your soil
Two simple field tests show how much clay your soil has:
- Jar test. Put a sample of soil and water in a clear jar, shake it well, and let it settle for 24 hours. Sand sinks to the bottom, silt forms a middle layer, and clay settles on top.
- Ribbon test. Squeeze moist soil between your thumb and finger. If it forms a ribbon more than about 2 in (5 cm) long, the soil has a high clay content.
The tests tell you about the soil, not about how well it will hold water. Clay still cracks, leaks and shifts, as the sections below explain.
Why clay still leaks
Clay can crack as it dries out. A basin dug into clay and then left empty will often develop cracks, and water will drain away through them. An earth pond that loses its water in a dry spell often has cracked clay at the base.
Water that pools beneath a liner can also cause trouble. Clay drains poorly, so water can collect under the liner and lift it, a problem called ballooning. If the water table is high, add a sump or a perforated pipe beneath the liner to carry the water away.
Expansive clay and rigid ponds
Some clays swell when wet and shrink when dry. This movement can crack concrete and can distort preformed shells, so think about this before choosing a rigid pond on clay ground. The preformed pond kit guide covers how to bed and back-fill a shell so that it does not shift.
Digging clay
Clay is hard to dig. It is easiest when it is moist, not saturated and not rock dry. Dig in suitable weather, and avoid long, deep cuts in wet clay, which can slump.
Clean clay subsoil can make a good, stable base for a liner once the stones are removed. The liner still needs underlay on clay. Stones and roots can puncture a liner whatever the soil is like. The underlayment guide explains which material to use.
Bentonite and earth ponds
Sodium bentonite is a clay that swells when it is wet. It can seal a leaky soil. Application rates are commonly quoted at about 1 to 3 lb per square foot or more, and the right rate depends on the soil.
Bentonite does not fix every leak. Sandy soils need far more than clay soils. It is also not a repair for a damaged liner. The liners and sealants guide covers the options for lined ponds.
Common questions and misconceptions
Will a clay pond stay clear? Not automatically. Koi and other bottom feeders stir up clay and keep the water muddy. Plants that cover the surface and a well-chosen fish stock help the water clear.
Is a clay pond zero-maintenance? No. Erosion and burrowing animals can damage the banks and the basin, so inspect the pond from time to time.
Can I skip the liner if the soil is clay? For a garden pond, usually not. Clay is not reliably watertight, and the water level will drop if it leaks.
Safety
Wet clay trenches are slippery and can slump, so avoid deep cuts without support, and never work at the bottom of an unsupported cut. Call 811 (US) or check utility plans before digging, and keep the garden pond guide safety points in mind, especially for children.