Pond Maintenance

How to clean a natural pond?

How to clean a natural pond without harming wildlife: when to clean, what to remove, what to leave behind, and how to handle invasive plants.

On this page
  1. What makes a natural pond different
  2. Check for protected species first
  3. When to clean
  4. Routine jobs
  5. Plant balance and invasive plants
  6. Deep cleaning: what to remove and what to leave
  7. Top up with rainwater
  8. Algae and chemicals
  9. How deep does a natural pond need to be?
  10. Common misconceptions
  11. Safety

Clean a natural pond as little as possible. Skim leaves and floating debris, pull blanketweed and thin the plants a little at a time, and do a deeper clean only every few years, in autumn. A natural pond has no pump or filter, so its plants and microbes do the balancing work, and heavy cleaning upsets that balance. Remove no more than about a third of the plants and sludge in any one year.

What makes a natural pond different

A natural or wildlife pond has no pump, no filter and usually no fish. Its plants, bacteria and invertebrates keep the water in balance. That is why the usual pond routines, such as heavy sludge removal or chemical treatments, can do more harm than good.

Don’t add fish to a wildlife pond. They eat tadpoles and insect larvae, which are the pond’s wildlife.

Check for protected species first

Before you start work, check whether any protected animals live in or near the pond. In the UK, great crested newts are protected, and disturbing them needs a licence. Look for frogs, toads and newts too. Work around their breeding times.

When to clean

Autumn is usually the best time, roughly October and November in the UK and the Northern Hemisphere, when the least wildlife is disturbed.

Avoid spring. Frogs, toads and newts spawn from about February to May in many regions, and the timing varies. Disturbing the pond then can harm the next generation.

Keep the routine small and frequent. A full clean-out is needed only rarely, roughly every five years or more, and the interval depends on leaf fall and the size of the pond.

Routine jobs

  • Scoop leaves and floating debris with a fine hand net, before they sink and rot into black silt.
  • Pull blanketweed by twisting it around a stick or a rake. Leave it on the edge of the pond for a day or two.
  • Scoop duckweed and other floating debris with a fine net.
  • Trim overgrown plants. Cut back marginal plants and water-lily leaves that choke the surface or drop dead material into the water.

Plant balance and invasive plants

Aim for plants to cover roughly half to two-thirds of the surface, including submerged oxygenating plants. The exact share varies, and some guides suggest less, so watch the pond rather than the number. Too many plants can lower the oxygen at night, because plants use oxygen in the dark.

Some plants are invasive, and they should come out. Check your local invasive species list, because the lists vary by country. Common examples include:

  • New Zealand pigmyweed (Crassula helmsii)
  • Parrot’s feather
  • Floating pennywort
  • Water fern (Azolla)

Don’t put removed invasive plants back in the wild, and don’t compost them near water. Bag them and bin them.

Deep cleaning: what to remove and what to leave

When you do a deeper clean:

  • Remove no more than about a third of the plants and sludge in one year.
  • Leave a few centimetres of silt on the bottom. It’s habitat for the microbes and invertebrates.
  • Leave the removed material at the pond edge for 24 to 48 hours, so that any animals in it can crawl back into the water.
  • Then compost the plants and leaves. Keep the compost away from the pond’s edge so that the nutrients don’t run back in.

Top up with rainwater

Use rainwater to top up a wildlife pond where you can. Tap water adds nitrates and phosphates, which feed algae. Dechlorinate tap water if you have no other source.

Algae and chemicals

Some green water in spring is normal, and it usually clears as the plants grow. Barley straw can help prevent algae over several weeks, but it won’t clear a bloom in a day or two.

Avoid algaecides and other chemical treatments. They harm wildlife, and a natural pond doesn’t need them. Chemical treatments also tend to kill plants and leave dead material to rot on the bottom.

How deep does a natural pond need to be?

A wildlife pond has no fixed minimum depth. In cold climates, a deeper area helps animals survive freezing weather. For a pond that will also hold fish through winter, aim for at least 60 cm (24 in) of depth in cold climates, and 90 cm (3 ft) or more where the ice gets thick. See the pond maintenance guide for more on depth.

Common misconceptions

  • Green water in spring is normal and usually clears as the plants grow.
  • Murky, tea-coloured water can still be healthy, especially where leaf tannins colour the water.
  • Algaecides are not needed, and they harm wildlife.
  • Draining and scrubbing a wildlife pond usually does more harm than good. Don’t drain it completely unless there’s an emergency. Total draining destroys the established bacteria and stresses the wildlife. If you must drain a pond, see the draining guide.

Safety

Wear gloves when you handle pond water or sludge, because both can carry bacteria. Cover any cuts first. Take care on the pond edge, which can be slippery. Check the rules for protected species before you start.

The complete guide to pond maintenance

How to Maintain a Garden Pond: A Seasonal Guide
Read the guide

Keep exploring

Guides from other topics

All topics →