The short answer
Pot pond plants in something heavy, slow to float and low in rich nutrients. Heavy clay-loam topsoil or bagged aquatic planting media works well. Cap the surface with washed gravel, and feed the plant with aquatic fertilizer tablets rather than mixing nutrients into the soil.
Media that works
- Heavy clay-loam topsoil. Dense, clay-rich soil holds roots firmly and does not float. It does not feed algae the way rich garden soil does.
- Bagged aquatic planting media. Products sold for ponds are designed to stay put in water. Check the label for peat, bark or compost, since some mixes include them and some do not.
- Calcined or porous clay aggregates. Koi keepers often use these. They hold little nutrient, so the plants will need feeding more often.
- Plain cat litter, with caution. Some pond keepers use plain, unscented, non-clumping clay cat litter as a budget option. Results vary, so treat it as an experiment rather than a proven choice. Avoid clumping or scented types.
Materials to avoid
- Multipurpose potting compost, peat, bark, perlite, vermiculite and manure. These float or release nutrients that feed algae.
- Garden soil treated with fertilizer, herbicide or pesticide. Residues can harm plants and fish.
- Sand alone. It holds few nutrients and washes out of the basket.
- Garden fertilizer granules. They are not a substitute for aquatic tablets.
Why rich soil causes trouble
Rich soil is not better in a pond. It fuels algae, which can turn the water pea-green. Lightweight mixes float out of the pot and cloud the water. What you want is a stable, heavy medium that roots can grip, with nutrients added through tablets at a controlled rate.
Baskets and containers
Mesh and lattice baskets are the usual choice. Match the container to the plant:
| Plant | Container | Notes |
|---|---|---|
| Hardy water lilies | Wide, shallow basket, about 30–45 cm (12–18 in) across and 15–25 cm (6–10 in) deep | Plant the rhizome at an angle. |
| Marginals | Aquatic basket | Space baskets about 30–45 cm (12–18 in) apart. |
| Lotus | Round container with no drainage holes, about 45–60 cm (18–24 in) across for standard varieties, or 25–40 cm (10–16 in) for bowl or miniature types | Keeps the running tubers from escaping. |
Some other basket notes:
- Fine-mesh baskets need no liner. Open-lattice baskets need a lining of hessian or burlap to hold the soil in.
- Pond plants do not need drainage holes the way garden pots do. Lotus should not have them.
Potting step by step
- Fill the basket. Add your heavy medium to 2–3 cm (about 1 in) below the rim.
- Firm it in. Press the soil down to remove large air pockets, then set the plant in place at the right depth.
- Rinse the gravel first. Dust and residue can cloud the water and stress fish. Use washed pea gravel.
- Cap with gravel. Add a 2–3 cm (about 1 in) layer of gravel over the soil. Use lime-free gravel, because limestone can raise pH and hardness.
- Wet and lower. Water the basket thoroughly, then lower it slowly into the pond at an angle so trapped air can escape.
The gravel cap stops fish, especially koi, from digging up the soil, and it keeps the soil from clouding the water.
Feeding with tablets
Feed with aquatic fertilizer tablets. Push each tablet 5–8 cm (2–3 in) into the soil, away from the crown. Keep tablets away from lotus tubers. Garden fertilizer granules do not work as a replacement.
How often to feed depends on the plant. Lilies usually need a tablet about once a month during the growing season, as covered in deep water pond plants. Lotus is fed once aerial leaves appear, as covered in growing lotus in a pond.
Repotting and dividing
Repot or divide when the roots fill the basket, usually every 2–4 years. Spring is the usual time, before new growth gets going. Lotus is the exception, since its tubers are divided every 2–3 years in spring before the shoots extend.
For the wider picture of pond plant groups and where they grow, see pond plants: planning a water garden.